| Material | Amount | Comment |
| Z-Base Glaze Cone 6 | | (This is my Base Glaze) Oxidation |
| | | Good glaze to use with colorants. Very nice with 1% |
| Gerstley Borate | 4 | copper carb (light blue green) or 3% copper for dark forest |
| Whiting | 17 | green. Semi Matt finish with a silky feel. Best to spray |
| Zinc Ox. | 9 | glaze. This glaze works well with mason stains up to 10%. |
| Nepheline Syenite | 20 | Glaze has a problem with iron. Will form a dark rust color at |
| Potash Feldspar | 30 | 2%. I use Laguna Borate instead of G. Borate and it works |
| Kaolin | 14 | well. Very nice glaze with the addition of up to 10% rutile. |
| Flint | 7 | (Try Titanium Diox. Up to 10%, good surface qualities) |
| | | |
| Semi Gloss Ash Cone 6 Ox. | | |
| Soda Feldspar | 38 | Nice glaze to use as a matt glaze. I use this |
| Ash | 40 | glaze as a spray coat to ZSM for glaze variation. |
| Ball-OM4 | 18 | Use thin. Nice glaze with oxides for color. |
| Talc | 2 | I use Ash from Axner Supply in Florida. |
| Dolomite | 2 | For a more matt finish increase ball clay. |
| Bentonite | 1% | (this glaze can have a "dark" quality, try changing the ash) |
| | | |
| Gold Black Cone 6 OX. | | |
| Ball-OM4 | 3.9 | Strange glaze! Turns gold where thick. Flat black with |
| Red Art | 47.8 | gold specks. Don't use with other glazes. Make small |
| Flint | 3.9 | batches because glaze does not keep well. |
| Black Copper Ox. | 4.9 | Worth the effort. |
| Cobalt Ox. (Black) | 3.9 | (Nice flat Black - Take out the copper) |
| Mag Dioxide | 35.6 | |
| | | |
| Base Clear Cone 6 | | Very nice base glaze for use on porcelain |
| Gerstley Borate | 51 | Clear shiny gloss glaze. |
| Silica | 31 | (try putting some Mason Stains in it - almost any stain |
| Kaolin | 16 | ( Mason rating 1,3,6) at 2% to 10% would be nice) |
| Custer Spar | 3 | |
| Bentonite | 1 | |
| | | |
| | |
| Always test glazes prior to use! | | |
| | If you have questions about these glazes |
| | I can be contacted at jerry@jerrybennett.net |
